GOTS 8.0 Readiness Assessment
Find out where your current compliance setup falls short across due diligence, chemicals, materials, environmental controls, worker protections, and audit readiness - then get an instant AI-powered gap analysis with prioritized next steps.
Почати безкоштовну оцінкуVersion 8.0 shifts GOTS from an organic integrity standard to a full ESG accountability framework. Here are the changes that matter most for your recertification.
Previously recommended, now compulsory. Companies must implement gender-aware due diligence, anti-corruption policies, conflict-of-interest safeguards, ESG disclosure, grievance mechanisms, and multi-source risk verification - all aligned with OECD guidance. A new GOTS Due Diligence Handbook for Certified Entities is now a binding reference document.
Certified entities must now establish and maintain a documented internal audit system. Internal auditors must be competent and independent. The audit programme must be risk-based, planned, and every relevant process shall be audited at least annually.
All chemical input criteria have been relocated into a dedicated chemistry section with a formal GOTS Manufacturing Restricted Substances List. PFAS limits are tighter, and new limits now apply for Bisphenol A and flame retardant residues. Endocrine disruptor hazard classes were added in line with EU CLP Regulation, and the cyclic siloxane D4 limit was updated.
Virgin polyester is no longer permitted as an additional fibre material. All polyester in GOTS goods must be thermo-mechanically or chemically recycled from pre- or post-consumer waste, with certification under RCS, GRS, or Recycled Content Standard. Non-GMO conventional cotton is also now explicitly excluded.
The environmental criteria section has been completely restructured into distinct operational subsections covering resource efficiency, air emissions, GHG emission management, waste, wastewater, textile waste, and packaging. Scope 1 and 2 GHG inventories with documented baselines and improvement plans are now required. Microfibre management is addressed within wastewater management using a risk-assessment approach.
A new packaging framework now defines primary and secondary packaging requirements. Plastic packaging must target at least 35% post-consumer recycled content, oxo-degradable plastics are prohibited, and virgin plastic hangers are banned in retail packaging. Bioplastic packaging is allowed only if certified non-GMO, biodegradable, and compostable. Circularity rules are now explicit, and the labelling sections were fully reformulated.
New climate-related worker protections include emergency response plans for extreme weather, environmental monitoring tools for temperature and humidity in work areas, and adjusted schedules during extreme conditions. Living wage requirements are stronger too: annual credible living wage estimation is mandatory, a plan to bridge the living wage gap is required, freedom of association criteria are expanded, and migrant worker fee protections are clarified.
Annual on-site inspections are mandatory, and at least 2% of inspections must be unannounced, or one per year, whichever is greater. Hybrid and remote audit modalities are now formalised, including virtual audits, off-site desktop review, and live video-streaming. Certification scope now includes approval of accessories, a new Controlled Supply Chain Scheme exists for small-scale operators in low-risk countries, and the Global Fibre Registry is mandated for traceability.
Technical quality requirements were restructured into Fastness, Durability/Robustness, and Other categories. New durability tests include spirality and visual inspection after wash. Microfibre shedding and fragmentation parameters were added, along with new residue parameters for bisphenols, flame retardants, phthalates, chlorinated paraffins, styrene, and xylene. Hygiene product testing is also stronger.
Оцінка
Пройдіть чотири короткі кроки, щоб оцінити поточний стан, виявити найбільші прогалини у відповідності та отримати миттєвий план дій перед наступним циклом аудиту.
Answer questions about your due diligence systems, chemical management, materials sourcing, environmental reporting, social criteria, and audit readiness.
Receive a 0-100 score indicating how prepared your organization is for a GOTS 8.0 audit, broken down by each key requirement area.
Get a detailed AI-generated gap analysis with prioritized recommendations specific to every new and strengthened GOTS 8.0 requirement.
Identify exactly where your current GOTS 7.0 compliance falls short of v8.0 - from the new MRSL to internal audit requirements - so you can prioritize what to fix first.
Understand the full scope of the ESG, climate, and due diligence requirements before reporting to leadership. Get a clear picture of resource and timeline needs.
Evaluate supplier readiness across materials sourcing, recycled synthetics traceability, chemical compliance, and Global Fibre Registry requirements.
Get a high-level view of organizational readiness, resource needs, and operational changes required - from GHG inventories to packaging overhauls to digital audit infrastructure.
The most significant changes are: mandatory OECD-aligned due diligence with formal governance requirements, a new dedicated GOTS Manufacturing Restricted Substances List with tighter chemical limits, a complete ban on virgin synthetic fibres, mandatory Scope 1 and 2 GHG emission inventories, comprehensive new packaging criteria, restructured environmental sections, new internal audit system requirements, and expanded worker protection measures including Living Wage gap bridging plans.
GOTS 8.0 was released in March 2026 and becomes mandatory for all certified entities on 1 March 2027. You have a one-year transition window. Any audit conducted on or after 1 March 2027 will be assessed against GOTS 8.0. Early adoption is permitted and encouraged.
The gap depends on your current compliance level, but most certified entities will need to build a formal OECD-aligned due diligence framework, establish an internal audit system, re-audit all chemical inputs against the new MRSL, replace any virgin synthetics with certified recycled alternatives, set up Scope 1 and 2 GHG inventories, overhaul packaging to meet new criteria, digitize documentation for hybrid audits, and implement new worker protection measures for extreme weather conditions.
You answer a series of questions about your current compliance systems across all key GOTS 8.0 requirement areas. Our AI then analyses your responses against every new and strengthened requirement in GOTS 8.0 and generates an instant gap report with a readiness score, category-by-category breakdown, and prioritised action items. It takes about 10 minutes and is completely free.
Yes. Beyond the free readiness assessment, Crosscheck's platform provides real-time gap tracking, automated document collection from suppliers via secure links with instant AI analysis, personalized compliance checklists, and continuous monitoring so you're always audit-ready - critical now that unannounced audits have increased. You can book a free consultation to discuss your specific needs.
Подивіться, як Crosscheck повертає команді час на пріоритетні задачі: автоматизує роботу з доказами, зменшує обсяг повторної роботи й допомагає тримати аудит під контролем.
Поговорити з експертом